Skip to content
NanoVNA Analyzer Series - SeeSii

NanoVNA Analyzer Series

Filters

$
$
  • Original price $322.00 - Original price $322.00
    Original price
    $322.00
    $322.00 - $322.00
    Current price $322.00

    Seesii NanoVNA-F V3 4.3'' Vector Network Analyzer 1MHz-6GHz

    Low stock

    👉【Improved Performance】: This NanoVNA-F V3 vna analyzer is a new production machine from 2023, with 4.3 inch 800 x 480 large touchscreen display,...

    View full details
    Original price $322.00 - Original price $322.00
    Original price
    $322.00
    $322.00 - $322.00
    Current price $322.00
  • Original price $94.00 - Original price $94.00
    Original price
    $94.00
    $94.00 - $94.00
    Current price $94.00

    Seesii NanoVNA-H4 4'' Vector Network Analyzer 10KHz-1.5GHz

    Low stock

    😊【2022 UPGRADED NANOVNA ANALYZER】: SeeSii Nanovna-h4 Vector Network Analyzer is developed by Hugen. With latest 4.3 version,10KHz-1.5GHz measure ra...

    View full details
    Original price $94.00 - Original price $94.00
    Original price
    $94.00
    $94.00 - $94.00
    Current price $94.00
  • Original price $114.00 - Original price $114.00
    Original price
    $114.00
    $114.00 - $114.00
    Current price $114.00

    Seesii NanoVna SAA-2N 4'' Antenna Analyzer 50KHz-3GHz

    Low stock

    ✅【Upgraded NanoVNA SAA-2N V2.2 Version】: Not only testing standing wave impedance of the antenna, can also debug the duplexer, the insertion loss ...

    View full details
    Original price $114.00 - Original price $114.00
    Original price
    $114.00
    $114.00 - $114.00
    Current price $114.00
  • Original price $145.00 - Original price $145.00
    Original price
    $145.00
    $145.00 - $145.00
    Current price $145.00

    Seesii NanoVNA-F V2 4.3'' Vector Network Analyzer 50kHz-3000MHz

    Low stock

    【4.3 inch Large Touch screen and powerful function】Handheld Vector Network Analyzer using 4.3-inch IPS TFT LCD screen, with a larger view angle a...

    View full details
    Original price $145.00 - Original price $145.00
    Original price
    $145.00
    $145.00 - $145.00
    Current price $145.00
  • Original price $94.00 - Original price $94.00
    Original price
    $94.00
    $94.00 - $94.00
    Current price $94.00

    Seesii Nanovna SAA-V2 3.2'' Vector Network Analyzer 10KHz-3GHz

    Low stock

    【NEW UPGRADE FNCTION】:Own our Seesii 3GHz Vector Network Analyzer,you can test the standing wave impedance of the antenna, you can also debug the ...

    View full details
    Original price $94.00 - Original price $94.00
    Original price
    $94.00
    $94.00 - $94.00
    Current price $94.00
  • Original price $51.00 - Original price $51.00
    Original price
    $51.00
    $51.00 - $51.00
    Current price $51.00

    Seesii Nanovna-H 2.8'' Vector Network Analyzer 10KHz-1.5GHz

    Low stock

    【New Upgraded Version】Compared with old version NanoVNA, it save more costs with the addition of ABS casing and the new packaging. Hot stamping ...

    View full details
    Original price $51.00 - Original price $51.00
    Original price
    $51.00
    $51.00 - $51.00
    Current price $51.00

FAQ

What is a vector network analyzer?

A vector network analyzer (VNA) is a sophisticated device used to evaluate the network parameters of electrical networks. It is particularly essential in the realms of microwave engineering and RF (radio frequency) design, where it is used to analyze components like antennas, filters, and circuits. A VNA works by sending a known signal into the component or network and measuring the response, thereby determining how the device affects the signal's amplitude and phase across various frequencies. This allows for precise characterization of the device's performance in terms of transmission and reflection properties, which is critical for developing systems that operate efficiently and effectively at high frequencies.

To summarize, a vector network analyzer helps engineers and designers measure and optimize the frequency characteristics of electronic components, ensuring they meet the necessary specifications for their intended applications.

What does a NanoVNA do for an amateur radio enthusiast?

● Check if your antenna is accepting power (low SWR, low return loss) like an

antenna analyzer. It does not know if your antenna is radiating efficiently (a

dummy load accepts power but does not radiate efficiently).

● Find the lengths and discontinuities of cables.

● Measure the resistance and reactance of components from which, for example,

inductance and capacitance can be calculated.

● Measure the transmission bandwidth of a filter as well as its reflection.

● Measure the self-resonance frequency of inductors and capacitors, for example,

of traps on dipoles.

● Measure the choking impedance of a balun as a function of frequency.

● The permeability of ferrite toroids.

● Many other measurements.

But you have to know some of the theory and math to turn calculate these quantities from what the VNA tells you. If you want to learn more about radio engineering, a VNA is an ideal tool.

A VNA measures S-parameters. What are they?

A S-parameter specifies the ratio of the electromagnetic wave exiting a port

given that entering a port. For example:

Device Under Test (DUT)

(2 port device)

In part 1

Out port 1

In part 2

Out port 2

S11: ratio of wave exiting port 1 that is entering port 1.

S21: ratio of wave exiting port 2 that is entering port 1.

S12: ratio of wave exiting port 1 that is entering port 2.

S22: ratio of wave exiting port 2 that is entering port 2.

These are complex numbers, and so they have both a magnitude (dB) and a

phase (degrees). For a passive device (like an antenna or a filter), the magnitude

must be less than 1 (smaller than 0 dB), as the device can not amplify the signal

What does an antenna analyzer do?

An antenna analyzer, also known as a SWR (Standing Wave Ratio) analyzer or RF (Radio Frequency) analyzer, is a crucial tool for anyone involved in radio electronics, particularly in the installation and maintenance of antennas. This device is designed to measure various parameters critical to antenna performance, including the input impedance, resonance, and SWR. Here’s a more detailed look at what an antenna analyzer does:

Measures Input Impedance: One of the primary functions of an antenna analyzer is to measure the input impedance of an antenna system. This is vital as it helps determine how efficiently the antenna can convert radio frequency energy from the transmitter into radiated energy.

Identifies Resonant Frequency: The analyzer can determine the resonant frequency of the antenna, which is the frequency at which the antenna is most efficient at radiating or receiving energy. Knowing the resonant frequency helps in tuning the antenna to operate optimally at the desired frequency band.

Checks SWR (Standing Wave Ratio): The SWR is a measure of how effectively the radio frequency power is being transmitted into the antenna without being reflected back to the source. An ideal SWR is 1:1, indicating no power is being reflected. The analyzer helps adjust the antenna to achieve a low SWR, ensuring maximum power delivery and minimizing signal loss.

Evaluate Bandwidth: Antenna analyzers can also assess the bandwidth over which the antenna maintains a good SWR. This is crucial for applications where a wide frequency range is necessary, such as in broadband systems.

Portable Diagnostics: Modern antenna analyzers are portable and can be used in the field to diagnose and optimize real-time antenna installations. This is especially helpful during the setup of amateur radio equipment or in commercial radio applications.

Complex Impedance Measurement: Advanced models provide a detailed view of both the resistive and reactive components of an antenna's impedance. This comprehensive data allows for more precise tuning and can help in identifying and solving complex antenna issues.

By providing these capabilities, an antenna analyzer not only aids in the initial setup of antenna systems but also in their ongoing maintenance and troubleshooting, ensuring that the antenna's performance is maintained at an optimal level across its operational bandwidth.

What are the different types of network analyzers?

Network analyzers are essential tools in the field of electrical engineering, particularly for testing the performance of radio frequency (RF) and microwave components. There are several types of network analyzers designed to meet various measurement needs and complexities. Here’s an overview of the primary types of network analyzers:

Scalar Network Analyzers (SNA): These analyzers measure the magnitude of an input signal versus the frequency but do not provide phase information. SNAs are typically used for simple assessments of component characteristics such as gain and power. They are less complex and generally more affordable than vector network analyzers. Scalar analyzers are ideal for situations where only amplitude information is needed, such as measuring signal strength or filter transmission.

Vector Network Analyzers (VNA): VNAs provide both the magnitude and phase information of the signal, offering a more comprehensive analysis. They can measure complex impedance, reflection coefficients, and S parameters (scattering parameters), which are vital for understanding the behavior of RF components in various conditions. VNAs are more sophisticated and are critical in designing, testing, and optimizing components like antennas, mixers, and amplifiers.

Large Signal Network Analyzers (LSNA): LSNAs are designed for analyzing the performance of components under large signal conditions, typically at or near their operating limits. They are used to measure both the amplitude and phase of the harmonic components of an active device under test. This is crucial for testing power amplifiers and nonlinear devices where the performance under large signal conditions can significantly differ from that under small signal conditions.

Real-Time Spectrum Analyzers (RTSA): While not traditionally categorized under network analyzers, RTSAs are worth mentioning as they are used in network analysis for real-time capture and analysis of transient and wide-bandwidth signals. They are invaluable in environments where signals change rapidly, such as in radar and electronic warfare.

Each type of network analyzer serves specific roles in RF and microwave engineering, from basic quality assurance and control applications to advanced research and development. Choosing the right type depends on the specific requirements of the project or application, including the range of frequencies to be analyzed, the nature of the components being tested, and the level of detail required in the measurement.

What is a spectrum analyzer?

Just like an oscilloscope is used to measure and view an electronic signal versus time, a spectrum analyzer is used to measure and view an electronic signal versus frequency.

The main specification points for a spectrum analyzer are its frequency range, the measurement resolution in this frequency range, and the signal signal levels that can be displayed.

The three important signal levels are:

Maximum level that can be input to the spectrum analyzer without damaging the spectrum analyzer.

The spur-free maximum level is the maximum input signal to stay below for a clean, spur-free display.

Noise level is the lowest discernable signal level and this depends on the resolution bandwidth. A lower bandwidth gives a lower noise level.

The maximum input signal level for the tinySA is 10dBm. Signals below -30dBm should not generate spurs in low input mode and the noise level with a Resolution Bandwidth (RBW) of 10kHz is about -105dBm

More expensive spectrum analyzers can digitize a broad frequency range at once and, using FFT, calculate the signal over a broad frequency range. Spectrum analyzers like the tinySA use a resolution filter to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. As the oscillator that does the sweeping and the power detector that measures the signal power require some settling time the scanning speed of the tinySA is limited. The narrower the filter the more time is needed to settle. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. However, with an increase in the frequency span and a decrease in the RBW, the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes.

Is the tinySA using the same HW as the nanoVNA?

No, the tinySA HW is very different from the nanoVNA and specifically optimized for its spectrum analyzer and signal generator functions. The tinySA does however use the same display, battery, and housing as the nanoVNA-H.

Who would use a spectrum analyzer?

Spectrum analyzers are indispensable tools across various sectors where detailed analysis of signal spectra is crucial. Here’s an overview of the professionals and industries that frequently use spectrum analyzers:

  • RF Engineers and Technicians: In the realm of radio frequency engineering, spectrum analyzers are fundamental for designing, testing, and troubleshooting RF components and systems. These professionals use the tools to measure signal integrity, power levels, and noise characteristics to ensure that RF systems are optimized for performance and compliance with regulatory standards.
  • Telecommunications Specialists: Within the telecommunications industry, spectrum analyzers help monitor and maintain infrastructure by analyzing signal transmission and detecting sources of interference. This ensures the reliability and efficiency of communication services like cellular networks, satellite communications, and radio broadcasting.
  • Electronic Design Engineers: These engineers utilize spectrum analyzers during the design phase of electronic circuits and systems to analyze the frequency characteristics of new devices. By doing so, they can ensure that electronic components function correctly within the intended frequency ranges and interact without causing undue interference.
  • Network Technicians and Administrators: In network operations, whether for data communication or broadcasting, technicians use spectrum analyzers to set up, maintain, and optimize performance, ensuring that networks operate within the designated spectral boundaries and without interference.
  • Quality Control Engineers: In electronics manufacturing, quality control is paramount. Spectrum analyzers play a critical role in the production line to test and verify that components meet specified guidelines, helping to prevent issues that could arise from faulty or substandard parts.
  • Audio Engineers: In both studio and live audio applications, spectrum analyzers are used to visualize and diagnose audio outputs. Audio engineers rely on them to balance and equalize sounds, ensuring clarity and quality in the audio they produce or manage.
  • Research and Development (R&D) Scientists: In scientific research, particularly in physics and materials science, spectrum analyzers are used to measure and interpret the frequency spectra of various phenomena. This analysis helps in the development of new materials and technologies.
  • Regulatory Compliance Officers: These professionals use spectrum analyzers to ensure that equipment complies with local and international electromagnetic compatibility (EMC) and spectrum management regulations. This is crucial for preventing interference with other devices and communications systems.
  • Educators and Trainers: In educational settings, spectrum analyzers are tools for teaching students about the principles of frequencies, waves, and signal characteristics in physics and engineering courses.

These diverse applications demonstrate the spectrum analyzer's critical role in modern technology and engineering fields, making it an essential instrument for anyone involved in the analysis, production, or regulation of electronic and radio frequency devices.

How does a spectrum analyzer work?

A spectrum analyzer is a critical instrument used in signal analysis to display the spectrum of frequencies of a signal or noise within a range. It essentially breaks down complex waveforms into their individual frequency components, which are then displayed in a visual format. Here's a step-by-step look at how a spectrum analyzer operates:

  • Input Signal: The spectrum analyzer receives the signal to be analyzed, which could range from radio frequencies and microwaves to simple audio signals.
  • Frequency Conversion: Depending on the type of analyzer, the incoming signal may be converted to a lower frequency through a process called heterodyning. This is typical in superheterodyne analyzers, where the signal is mixed with a local oscillator to produce an intermediate frequency (IF) that is easier to handle within the device.
  • Filtering: The signal is passed through a resolution bandwidth filter, which limits the range of frequencies analyzed at any given time, improving the selectivity and noise performance of the measurement.
  • Detection: The analyzer detects the signal amplitude at various frequencies. This involves converting the energy of the filtered signal into a measurable form, typically using a logarithmic scale. Most spectrum analyzers display signal amplitude in decibels (dB) because of the wide range of signal amplitudes they must handle.
  • Display: The processed signals are then graphically displayed on the spectrum analyzer’s screen. The horizontal axis represents frequency, while the vertical axis represents amplitude. This visual representation helps users quickly identify the characteristics of the signal, including the presence of any spurious signals, the dominance of specific frequencies, or the detection of intermittent signals and noise.
  • Analysis: More advanced spectrum analyzers provide additional analytical tools, like the ability to perform peak detection, measure power within a specified bandwidth, or analyze the harmonic content of signals. They may also offer digital signal processing (DSP) techniques to perform more complex analyses, such as phase noise and modulation analysis.

Spectrum analyzers are vital in various applications such as electromagnetic interference (EMI) testing, wireless communications, and broadcasting, where they help verify compliance with performance standards, diagnose errors, and ensure efficient transmission of information. Their ability to detect rare, short-time events and characterize complex waveforms makes them indispensable tools in both development and troubleshooting tasks.

Free Shipping

When you spend $100+

Give Us A Call

+1 (201) 555-5555

Chat With Us

We offer 24-hour chat support

Locations

Find a store near you

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare