Passer au contenu

Seesii Nanovna-H 2.8'' Vector Network Analyzer 10KHz-1.5GHz

par SeeSii
Prix d'origine $51.00 - Prix d'origine $51.00
Prix d'origine
$51.00 - $51.00
Prix actuel $51.00
  • New Upgraded Version】Compared with old version NanoVNA, it save more costs with the addition of ABS casing and the new packaging. Hot stamping technology and plastic inner protection reduce the problems caused by transportation shocks and other processes.

  • USB-C to USB-C】 Support USB-C to USB-C line, more convenient to connect to mobile phones. Compatible with most Android phones with the same screen display (doesnt support for iPhone).

  • Wide Range Frequency】Can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The metal shield is designed to reduce the external interference and improve the measurement accuracy.

  • Original Equipment (OE) fit form and function】Simple and practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, please manually replace the transceiver port wiring.

  • Platinum connector threads】Reduce the number of connection points for faster reaction to change. Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations.


Package Dimensions:7.76 x 5.04 x 1.14 inches; 7.05 ounces
Item model number:NanoVNA-H
Batteries:1 Lithium Ion batteries required. (included)
Date First Available:November 5, 2019

2021 Upgraded HW 4.3 VersionNanoVNA-H 10KHz-1.5GHz

2021 New Upgraded Latest Version 3.6 Vector Network Antenna Analyzer 10KHz-1.5GHz MF HF VHF UHF with Shell

ABS case: 58.7mm x 91.3mm x 17.1mm (excluding protrusions)

PCB: 54mm x 85.5mm x 11mm (without connectors, switches)

Measurement frequency: 10KHz -1.5GHz

RF output: 0dbm (±2dbm)

Measurement range: 70dB (50kHz-300MHz), 60dB (300M-900MHz), 40dB(0.9G-1.5GHz));

Port SWR: < 1.1

Display: 2.8 inch TFT (320 x240)

USB interface: USB type-C communication mode: CDC (serial)

Power: USB 5V 120mA, built-in 650mA-h battery, maximum charging current 300mA

Number of scanning points: 101 (fixed)

Display Tracking: 4, Marking: 4, Setting Save: 5

Frequency Tolerance:<2.5ppm

Frequency Stability:<0.5ppm

Upgraded SD Card Slot Design

Upgraded SD Card Slot Design

Can directly record data to the SD card up to 32Gbwhich is convenient for your data sharing and storage

Latest 3.6 HW Version

Latest 3.6 HW Version

Added time display function,only supports changingthe time of the product on the pc

Saving Measurement Data with a MicroSD Card—Support up to 32GB Memory Card

You can use a MicroSD card to save measurement data in SNP format or to save screenshots in BMP format. MicroSD card uses SPI mode and only supports smaller than 32GB and formatted with FAT or FAT32.

Built-in Calibration Function

Calibration must be performed whenever the frequency range to be measured is changedIf the error has been corrected correctly,the calibration status display on the screenwill be CnDRSTX.n is the data number being loaded

Support Android Phone & PC Software Control

Compare with old version, it supports time domain analysis function (TDR), and more convenient to connect to mobile phones. Compatible with most Android mobile phones. Support Windows Computer Control.

Comparer les produits

{"one"=>"Sélectionnez 2 ou 3 articles à comparer", "other"=>"{{ count }} éléments sélectionnés sur 3"}

Sélectionnez le premier élément à comparer

Sélectionnez le deuxième élément à comparer

Sélectionnez le troisième élément à comparer