Salta il contenuto

SeeSii TinySA 2.8'' Spectrum Analyzer 100kHz-960MHz with ESD Protect

Prezzo originale $87.00 - Prezzo originale $87.00
Prezzo originale
$87.00
$87.00 - $87.00
Prezzo attuale $87.00

Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz.

Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz.

Tiny Spectrum analyzers & ESD Function】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency range.

PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer. The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface.

Package List】1x Tiny Spectrum Analyzer; 2 x 20cm RF Cable;1 x USB Cable;1 x SMA Female to Female Connector;1x Touchscreen Pen;1 x SMA Telescopic Antenna.

Specifications

Package Dimensions:10.35 x 7.6 x 1.3 inches; 2.2 Pounds
Item model number:TinySA
Batteries:1 Lithium Ion batteries required.
Date First Available:August 5, 2020
Manufacturer:Seesii
ASIN:B08FB5XT7B

TinySA Spectrum Analyzer

The upgraded tinySA spectrum analyzer with ESD protrcted function, primarily intended for 0.1MHz to 350MHz

Specification: * Display resolution 320*240 pixels * Screen diagonal 2.8" * 16 bits per RGB pixels * Resistive touch control * Jog switch control * USB serial port control * Optional TTL USART port (SW not yet implemented) on the internal PCB * Linear power supply to avoid switching noise.

High Quality MF/HF/VHF Input for 0.1MHZ-350MHz

High Quality MF/HF/VHF Input for 0.1MHZ-350MHz

Lesser quality UHF input for240MHZ-960MHZ

Upgraded ESD Protected Function

Upgraded ESD Protected Function

Enables the product to have a higherantistatic level and a longer service life

2021 Latest 3.1 Version

2021 Latest 3.1 Version

The performance is more stable and sensitive

Upgraded ESD Protected Function

The performance of the 2021 latest version 3.1 TinySA spectrum will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life.

4 Modes for Input/Output

Low input mode:100kHz to 350MHz

High input mode:240MHz to 960MHz

Low output mode:100kHz to 350MHz(Sinus)

High output mode: 240MHzto 960MHz(Square wave)

Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz.

Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz

Color display showing 290 scan points covering up to the full low or high frequency range.

Input Step attenuator from 0dB to 31dB for the MF/HF/VHF input.

When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz.

Built-in Calibration Signal Generator

Automatic self test and low input calibration

PC Controlled Spectrum Analyzer Via USB-C Cable

PC Control

The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel

Confronta Prodotti

{"one"=>"Seleziona 2 o 3 articoli da confrontare", "other"=>"{{ count }} di 3 elementi selezionati"}

Seleziona il primo elemento da confrontare

Seleziona il secondo elemento da confrontare

Seleziona il terzo elemento da confrontare

Confrontare