SeeSii NanoVNA-H Vector Network Analyzer 10 kHz–1.5 GHz | Handheld Antenna

You want to tune antennas, verify filters, and see matches without hauling bench gear. NanoVNA-H (HW3.6) gives you lab-style visibility in a pocketable vector network analyzer. Power it on, run a quick open/short/load calibration, and you’re looking at S11/S21, VSWR/SWR, phase, delay, and a live Smith chart from 10 kHz to 1.5 GHz—perfect for MF/HF/VHF/UHF work.

Prefer a bigger screen or automated sweeps? Plug in via USB-C and use your favorite PC/Android app to capture traces and export Touchstone (SNP/S1P/S2P) files for simulation. The redesigned board adds battery management, metal shielding, and ESD protection, so field measurements are steadier and safer. In short: you get reliable results, faster setup, and fewer trips back to the bench.

• 10 kHz–1.5 GHz coverage – Tune and validate antennas, filters, and matching networks across MF/HF/VHF/UHF.
• S-parameters with insight – Measure S11/S21, view VSWR/SWR, phase, delay, and Smith chart for real matching work.
  
• Handheld & portable – 2.8" 320×240 color touchscreen with clear traces; runs stand-alone or over USB-C.
  
• PC/Android control – USB-C CDC serial interface for TinyVNA/NanoVNA apps; capture data, automate sweeps, and manage settings.
  
• Touchstone export – Save SNP files to the included micro-SD for RF design and simulation workflows.
  
• Improved hardware – Metal shielding and ESD protection enhance stability and accuracy in noisy environments.
  
• Practical dynamics – Typical dynamic range ~70 dB (50 kHz–300 MHz), 60 dB (300–900 MHz), 40 dB (900 MHz–1.5 GHz).
  
• Simple field kit – SMA cal kit, SMA-M/M leads, and F/F adapter cover common setups in minutes.
  
• Battery management – Built-in rechargeable battery with USB-C charging; use a power bank for extended sessions.

• Model: SEESII NanoVNA-H (HW3.6)
• Frequency Range: 10 kHz–1.5 GHz
  
• Dynamic Range (typ.): 70 dB (50 kHz–300 MHz), 60 dB (300–900 MHz), 40 dB (900 MHz–1.5 GHz)
  
• Display: 2.8" TFT, 320×240 (touch)
  
• Scanning Points: 101 (fixed) • Traces: up to 4 • Markers: up to 4 • Save Slots: 5
  
• Frequency Tolerance / Stability: <2.5 ppm / <0.5 ppm
  
• Port SWR: <1.1
  
• RF Output: 0 dBm (±2 dBm)
  
• Interface: USB Type-C (CDC serial), PC & Android support
  
• Storage: micro-SD (32 GB included) for data logging/Touchstone export
  
• Power: Built-in ~650 mAh Li-ion; USB-C charging; ~2 hours typical (extend via power bank)
  
• Included in Box: NanoVNA-H unit, USB-C cable, 2× 30 cm SMA M-M RG174 cables, SMA calibration kit, SMA F-F adapter, quick guide
  
• Package Size / Weight: ~5.2 × 4.17 × 2.36 in; ~1 lb